Accessible Styles Template for MS Word: Steps and Examples
Learn how to make an accessible Styles Template for MS Word.
Follow this step-by-step guide to create accessible documents in MS Word.
Subject(s):
Artist Resources
Resource Type(s):
Checklist, Step-by-Step
Audience:
Introduction
Before reading this, you might want to read:
This article will introduce you to the essentials of how to create an accessible document using Microsoft (MS) Word. MS Word is not only one of the most popular pieces of software to create documents, it is also one of the most supported for accessible design. When you use MS Word to build your accessible document you can convert it to an accessible EPUB3 or PDF with little to no meddling post-conversion. Think of your MS Word document as the foundation of your accessible document work. With a properly formed Word document, multiple accessible formats are easily attainable! There is a section near the end of this article that will provide information on how to convert a finished MS Word document to other formats.
But why is it important to use accessibility design standards right from the beginning? According to the 2023 Statistics Canada Survey, 5.2 million Canadians have difficulty with print material. This number will only grow as our population continues to age. Creating a document starting with accessible design will ensure everyone is able to access, read, understand, and even enjoy your work! When you build your work from the foundations up leading with accessible design, you create a product that is useful for everyone.
It is important to note that the desktop version of MS Word is superior to the online version when creating a truly dynamic and user-friendly accessible document. Microsoft also provides great customer support if you come across any issues or blockers when creating your accessible document.
Please note: There is a slight variation in the user interface of MS Word between Mac and Windows users. These variations will be highlighted throughout this article, along with screenshots from both operating systems when these variations do occur. There will be useful additional resources linked throughout this document, as well as a basic checklist to help get you started.
Before we can get started with creating an accessible document, we need to make sure you have everything set up for success!
First, set the document view to Print Layout:
Next, open the Navigation Pane:
This is a “map” of the structure in terms of the heading styles that have been applied in the document. Headings are one of the most important pieces of your accessible document, as they will be the main navigational points. The map also provides you with a quick means of navigating to different headings and will help you as you build your heading structure in your document.
The next step is to open the Styles Pane:
With styles applied, assistive technology can, at the command of the user, jump to the desired part of the document, for example a heading. A properly styled document will ensure a person with a print disability will be able to access and read the document as quickly and as efficiently as those who have good vision.
Styles are used for most formatting in your document. This includes:
In this way, the text with the applied heading is properly marked up for screen readers and conversion tools to identify what it is, such as heading, emphasis, caption, etc. This gives a hierarchical structure to a document’s content that helps your reader quickly identify the different parts of your text and navigate to them quickly.
Styles also allow readers to change how the formatting is presented for them to help customize their reading experience. For example, a reader can change the thickness of a bolded word if it has been marked up with the Strong Style, but not if you used the direct formatting for Bold. If direct formatting is used, readers can’t change the content in a way that works for them (i.e. they are unable to load their own style set).
Direct formatting is when you use any of the buttons found on the Home Tab of the Ribbon Menu to style your text.
Only use the Styles Pane to format and modify text, and not direct formatting. There are a few exceptions to this rule.
You can use direct formatting for:
Now that we have a basic understanding of Styles, let’s learn how to use your Styles Pane!
From the Styles Pane you can:
Tip: If you use Mac you can turn on “Show styles guides”, and it will create a color-coded guide down the left side of your document. I find this useful when I am doing a final check of a larger document to ensure all the styles are applied correctly. Note: this will not work on a blank document where no styles have been applied and there is no text.
To display the styles guide for MS Word on Mac:
This will turn on a colour coded and numbered guide to the left of your document area. The colours and numbers match the styles in use as they appear in your Styles Pane.
You will need to clear styles for two reasons:
The reason this is recommended is to ensure that any unwanted styles are removed either from the document, when reformatting, or from the word/phrase when fixing a mistake. Otherwise these unwanted styles can remain in your document.
To clear formatting from the Styles Pane:
From the Styles Pane it is easy to apply styles.
To apply a style from the Styles Pane:
Remember, only modify a style through the Styles Pane. See the instructions below for how to modify styles.
You can modify the formatting of any style directly through the Styles Pane.
To modify a style from the Styles Pane:
This will open the pop up window for that style.
Next:
As mentioned earlier, if you make a mistake with an applied style you need to clear the formatting first.
To fix style mistakes from the Styles Pane:
This will ensure that you are not layering styles in the document, which can impact accessibility. MS Word can sometimes be finicky with changing styles within the document, and this practice will help avoid any potential issues that could arise.
Let’s talk a bit more about styling fonts for an accessible document.
Before we get deeper into this topic, it is important to note the styles we are discussing in this section can cause accessibility barriers to people with print disabilities, so you need to be careful when you are using these styles. A good rule of thumb is to ask yourself: if I do not use the style, does the meaning of the text change? This will help you identify if you are using the style to apply additional or semantic meaning (e.g. emphasis) or if it is only adding visual meaning. If it is only adding visual meaning I would recommend either not using the style in that context, or use it very sparingly. We have to be careful when we retain this type of formatting.
Avoid using Strikethrough or Underline in your document. A good example of a style that is only visual is Strikethrough. There is no translatable markup to this style, and it causes a real barrier for low vision readers and readers with cognitive reading disabilities. Underline is generally only used for hyperlinks, so if you use it otherwise you can potentially confuse your reader. If you need to emphasize a word or phrase, use Emphasis Style or Strong Style depending on the context. We explore this a little further down!
For the main content of your document, you will use the Normal Style. This should have no extra styling attached to it. If you want to change the font, colour or size of this style, only use Modify Style as explained above.
There is no solid consensus on what makes a font accessible, but the general recommendations for your Normal Style should be the following:
Please note: you can add a space below and or above any style in the Modify Style window using the Increase Paragraph Space. It is the button with the two blue arrows pointing up. This can add visual space to the paragraphs in your document without using double paragraph spaces. Double paragraph spaces can cause reading issues for screen readers and are not accessible. Make sure you do not increase the space around your style by more than one space, or else you will cause reading issues for people who use Zoom.
If you want to add extra styling to the main content of your document, you can apply additional styles such as Emphasis Style, or Strong Style.
Italicized text can create accessibility barriers for readers with low vision or cognitive print disabilities. Blocks or paragraphs of italicized text are particularly problematic, and italics should be used with caution. In general, italics (Emphasis Style) should be avoided unless it is used to:
Never use direct formatting, only use the Emphasis Style. When you use the Emphasis Style it will mark up the word or phrase so that assistive devices can identify the style.
To apply Emphasis Style:
Please note: if you review this applied style using “Show styles guides” for Mac you will notice there are two styles applied: Normal, and Emphasis. This is not an issue.
The recommendation for using Strong Style to bold text is similar to when and how to use Emphasis Style. Be mindful of when you use it, just as described above. Most commonly, bold text is used to indicate importance, such as when using signal words like “warning” or “alert”, or with imperative statements like Stop!
Follow the same steps to apply the Strong Style as you did with Emphasis Style.
Other styles you may end up using in your document could include:
If you have a blockquote in your document, do not use direct formatting to style the quotation, use the Quote Style! You can apply this style the same way you apply other styles. If you wish to modify the style, make sure you remain within accessible standards, and use the Modify Style option in the Styles Pane as explained earlier in this article.
If there is an Author or Citation of a quote, you can create a Citation Style that will mark up the attribution for readers with print disabilities.
To create a new style for Windows:
To create a new style for Mac OS:
Now you can set up your new style as follows:
Part of the accessibility of your document is the style of font you choose, and the colour contrast of your document.
Let’s start with Font Type. There is a lot of discussion on what makes an accessible font type, a great source of information comes from the National Network for Equitable Library Service (NNELS) who put together NNELS Accessible Fonts. The information found on this page was created by staff that have lived experience, who interact with all sorts of font types on a regular basis.
The general recommendations for Font Type are as follows:
The most important thing is that the reader has the ability to change the font type and size as needed.
Colour contrast is also very important. This is the contrast between the colours you choose for your text and your background. Never use colour to convey meaning and ensure your document has a sufficient colour contrast ratio. The best way to ensure proper contrast is to keep it simple and use black text on a white background, but this might not always be achievable.
When choosing your colours, take into consideration someone who may be colour blind, and people with low vision. A high colour contrast between your text and background is what you want to aim for when choosing your colours. The Web Content Accessibility Guidelines recommend a minimum contrast of 4.5:1.
You can also use the TPGi Colour Contrast Analyser to see if you are meeting the recommended contrast. You can also find further information on colour contrast through Microsoft Support.
Word’s built in Accessibility Checker will also analyze your document and tell you if there are any areas that have insufficient colour contrast. We will dive deeper into using this Accessibility Checker near the end of the article.
I mentioned earlier that styles will mark up a document and this will help assistive devices efficiently navigate the document by identifying the styles. Headings are the most important example of this, as they are the main structural navigation of your entire document. For them to be effective you must use the styles in your Styles Pane and follow the Rule of Hierarchy (i.e. every heading follows a structured hierarchical order.)
When it comes to the style of the Heading, only use the Heading Styles, and modify as needed within accessible guidelines. Simply bolding the text or making it bigger will not work.
The Rule of Hierarchy is simple. There are multiple heading levels you can choose from, generally from 1-6. The top of the Hierarchy always starts with Heading Level 1. Each number under number 1 is the next level down in the Hierarchy. For example:
Most documents have multiple heading levels, and you need to ensure that you are following the Rule of Hierarchy or else you will cause false navigation. Basically, never skip a heading level! If a document has a main section heading that is Heading Level 1, then any subsection must be Heading Level 2. If you jump to Heading Level 3 instead, the reader using an assistive device will think they have missed a section, and get lost within your document.
When you apply headings to your document, they will appear in your document map to the left of your workspace. Remember back at the beginning when we set up your work space? This is why we opened the document map!
You can apply Heading Styles the same way you apply other styles. As you apply headings to the document, ensure they appear in the navigation pane in the correct order and at the correct level (Heading 2 will be indented relative to Heading 1).
A common accessibility mistake that is seen in multiple types of Word documents is using a heading style with no content between the headings. This will cause a false navigation error, so it is very important to always have some text between each heading, or else your readers using assistive technology will get lost in your document. Sometimes this can also occur with something called a split heading, which is when one section heading is split over two lines. For example:
A Heading:
The Subheading
To fix this, you can have the main heading and the subheading all on one line. For example:
A Heading: The Subheading.
When you are applying headings to your document (using proper hierarchy!) you are building the main navigation to your document. Once you have finished your heading structure, you can insert a Table of Contents. I would recommend saving this step to the end of your document creation. You should also keep in mind what type of format conversion you want to do with your completed accessible Word document. For example, if you want to create an EPUB3 using the DAISY Consortium’s Word2EPUB app, then you don’t need to create a Table of Contents in your Word document. The app will build your Table of Contents based on your heading structure. It really depends on your intent with your final Word document.
To create a Table of Contents:
Remember: you can only do this after you have completed the heading structure of your Word document. MS Word will create the Table of Contents based on this heading structure, and it will be easier for a reader who uses an assistive device to navigate through your document!
The first thing to learn about tables is to never use them for formatting purposes. This is a very big accessibility no-no that will cause a reader using an assistive device to get lost in your document. Tables should only be used for presenting tabular data. If the data in a table is not tabular, then it should be presented as a list or paragraph. Avoid using merged and split cells in your table, and if it is a complex table, consider breaking it down into smaller tables with headings.
The second thing to learn about tables is how to make them accessible so a reader using assistive technology can navigate the table with the same speed and efficiency as other readers!
This section will take you through the four main steps for creating an accessible table.
To create an accessible table:
When you add a table to your document, two new tabs appear in the ribbon: Table Design and Table Layout. These are the Table Tools. They will appear in the Ribbon Menu when you have the table selected.
Next you need to ensure there is a Header Row.
To set the Header Row:
Having a Header Row will make it easier to understand the information that the table contains. Some screen readers can be set up to read column names at any time, which can help when working with a large table.
Next, ensure “Repeat Header Rows” is enabled. This ensures the Header Row is repeated across pages. Do this even if the table does not go over multiple pages.
To enable “Repeat Header Rows”:
This will open the Table Properties dialog box.
Next:
The last step is to enter a description and a title for the table. These should always be included to give context to a table. Descriptions should answer the question: “What is the table’s purpose and how is it organized?” For example: “A breakdown on the project funding separated by columns for the activity name and cost.” Remember to keep the description short and direct. A good guideline is to keep it around 140 words.
To add a Description and Title:
If a caption is present, the caption for tables always goes above the table.
To insert a caption:
This will open the Caption dialog box.
A good rule of thumb is that if something can be a list, it should be formatted as a list. Basically, you want to avoid lists that are within the sentence structure. For example, Momma Bear, Poppa Bear, Baby Bear. We can make this same list accessible if we format it as follows:
Lists are one part of accessibility formatting you can use direct formatting for. When you make a list using direct formatting, it will still cause the “List Paragraph” style to appear in the Styles Pane. If modifications are needed (i.e., spacing), do this by Modifying the Style (not by using further Direct Formatting!).
Assistive devices are smart! They will let the user know if the list is nested, and how many levels are in the list. This is yet another example of how proper accessible formatting can create a truly equitable reading experience.
To create a List:
Whenever there is text in another language it’s very important to properly identify the language of the text. This ensures that screen readers, braille displays, and other assistive technologies can render the content accurately and read the content according to the pronunciation rules for that language. Nothing is more annoying than reading a book and your assistive device mispronounces the word or phrase!
In some cases, though, it’s not desirable to markup the change in language as it negatively affects accessibility.
Avoid marking up the following:
To mark up Secondary Language in Windows:
This will open a pop-up window for Language:
To mark up a secondary language in Mac OS:
This will open a pop-up window.
Next:
For more information on secondary languages please go to the WCAG page on Language of Parts.
If you post a full link, it will be difficult (and even annoying!) for an assistive device to read. It can also be difficult for people with low vision, or cognitive reading disabilities.
To make a hyperlink accessible, you need to ensure that the display text is meaningful, clear, and direct. We also want to avoid terms like here or click here as they hold no meaning to someone using an assistive device. Click where? An example of a link with meaningful text is as follows: eBOUND Canada Website.
To edit existing hyperlink display text for Mac:
This will open the Hyperlink dialogue box.
If you choose to put any information into the Header and/or Footer section of your document, you must also repeat that information in the main body of the document. Screen readers will not pick up on anything that is in the Header and/or Footer sections. Remember, if you are including logos in these sections, to also include alternative text (the section below does a deeper dive of alt text). Alternative text for a logo can be simple as: “Logo: eBOUND Canada.”
Images are an essential part to reading, and we must ensure all the images we use are properly formatted and include meaningful and accessible Image Descriptions, also known as Alternative Text (Alt Text). All images must have alt text for the document to be accessible.
Alt text is more than just a description of an image, it is replacing the image with text to help replicate the experience of reading for someone who cannot see the image.
In this article, I will not be going into how to write image descriptions, but there are many wonderful resources you can use to help you get started. Since alt text is a combination of both technical and creative writing it can take a bit longer to master, and there are always new images and new contexts that will challenge you and your team. The most important thing to remember is to follow the general guidelines, have an editor assist you, and keep writing. You will get better in time!
Let’s now dive into how to format your image, and then insert alt text.
When you insert an image into your Word document, one of the first things you want to ensure is that it is set to be in line with text. This must apply to all images so the screen reader can locate them. A nice bonus of doing this is that it will also help avoid your image from jumping around if you need to change anything in the document!
To set your images “In Line with Text”:
If there are captions for the image, they need to be formatted correctly so the screen reader can identify them with the image.
To insert any captions for the images:
This will open the Caption dialogue box.
Remember all images must include alt text. Never rely on Word’s automated image descriptions. They are not reliable and will not describe the image correctly. If you have maps, graphs, or charts in your document, you may need to create a long description.
To insert alt text:
This will open a new pane to the right of the Word window titled: “Alt Text”. Now you can enter your image description into the textbox.
You will only be able to access the Alt Text box when the image is selected.
A helpful tip for writing and editing your alt text is to do it in a separate document, and then insert the finished descriptions when they are ready. This is recommended for a couple of reasons. First, the Alt Text dialogue box is small, and can prove challenging to read and edit your work. A separate document would eliminate this problem. Second, MS Word can be temperamental when there are multiple images in one document, and can close when you are actively writing or editing in the Alt Text box before you are able to save your work. An added bonus of using a separate document for alt text is that this makes it easier for multiple people to edit and revise all image descriptions! Alt text must be treated like any other form of text in your work, and go through multiple people to ensure it is of the best quality for grammar, meaningfulness, and accessibility.
There is one exception to the rule when it comes to images requiring alt text, and those are decorative images. Decorative images are images that add no meaning to the surrounding text, for example decorative content breaks or chapter headings. If you remove these images, no information is lost to the reader as they only hold visual meaning and not semantic meaning. If you have these images in your Word document you can set them to decorative.
To set an image to decorative:
A screen reader will now be able to skip over these images!
Once you have completed all the above steps, you can run Word’s built-in Accessibility Checker! This will have you catch most of the errors in your document, but it does not always catch every issue or error. This is why it is so important to start from the beginning with building your accessibility document. If you are converting your document to another format, you will also be able to do additional accessibility checks depending on the software you are using for conversion.
To run the Accessibility Checker:
When it is done, a pane will open to the right side of the Word window titled “Accessibility” in Mac OS. This is titled “Accessibility Assistant” in Windows.
Please see Rules for the Accessibility Checker for a full list of errors and recommendations. You can learn more about the Accessibility Checker at Microsoft Support: Accessibility Checker.
Starting with a fully accessible MS Word document will mean you can smoothly convert your document into an EPUB3 or PDF with little need for revision after conversion is complete. It will save you a lot of headaches, and train you to create and design all that you do from an accessibility perspective!
If you want to convert your MS Word document to a PDF, it is recommended to use Adobe Acrobat Pro as it is the software that has the most accessibility support and follows PDF Accessibility standards as outlined by the PDA/UA foundation. There are other PDF software choices out there, but Adobe Acrobat Pro is the best choice for your accessibility needs. You can find a list of other PDF software at PDF Techniques for WCAG 2.0.
Adobe Acrobat Pro has a built-in checker that walks you through checking and fixing your documents with clear and user-friendly reports. Through this checker you can choose which accessibility problems to look for and how you want the results reported, and it provides helpful links and hints for repairing issues
When converting to PDF, the most important step is to make sure you are exporting it as an Accessible or Tagged PDF. Otherwise, all the work you just did will be lost during conversion. To convert your Word document to PDF you can follow the instructions at Microsoft Support for how Save or convert to PDF or XPS in Office Desktop apps. If you have an older version of MS Word, please go to Create accessible PDFs for directions for older versions of Word.
Once you have converted to PDF, you will want to run the build in Accessibility Checker. It is very thorough and has a lot of support. Learn more at Create and verify PDF accessibility (Acrobat Pro).
Another resource I strongly recommend is the PDF Accessibility Facebook group. It is a very active and supportive community of people to help you with all your accessible PDF tagging questions!
HTML based documents are widely considered the most accessible formats, and are often preferred over PDF by people with lived experiences. The EPUB3 format is an HTML based document.
The DAISY Consortium has created an application for MS Word that you can download to seamlessly convert your Word document into an EPUB3 called WordToEPUB. The EPUB3 you create during this conversion meets the latest standards for EPUB accessibility and includes quality assurance checks within the conversion process. It has a very user-friendly interface, great support, and is easy to use!
You can learn how to download and use this application at The DAISY Consortium WordToEPUB. The DAISY Consortium also provides some additional guidelines for how to prep your Word document for conversion, including adding page numbers.
You will need a Windows operating system to use this app as it is currently not compatible with Mac OS. You will also need to have Sigil, EPUBchecker, Ace by DAISY, and Thorium to fix any issues that may arise during conversion and run the built-in Quality Assurance testing. Don’t worry though! The app has built-in download links to help you get everything you need!
It also has incredible support and is consistently updated. They also encourage user feedback from around the world.
Another way to make an EPUB3 is using InDesign. The user interface and workflow for this software is more advanced than WordToEPUB. InDesign is one of the most widely used softwares in the publishing industry.
Chances are, you may already know how to use InDesign, but if you are new to the software, there are many online resources and courses you can take to ensure your success.
To learn how to convert your Word document to InDesign, please check out How to Convert a Word File to InDesign with Consistent Formatting on LinkedIn.
It is important to note, that just like with WordToEPUB, there are some additional tips on how to style your Word document for conversion to InDesign. You can learn more about this from the InDesign Word Styles course by Laura Brady. This course focuses on Word documents created specifically for InDesign. Laura Brady is a leader in EPUB accessibility and an expert with InDesign.
If you are new to InDesign, I would also recommend checking out Laura’s course on 1.0 Making Ebooks with InDesign – Introduction by Laura Brady. There are many wonderful additional resources on APLN (Accessible Publishing Learning Network) to help you on your accessible EPUB journey!
Below is a checklist based on the instructions in this article. Please remember, this is just an introduction to creating an accessible Word Document. It does not cover all accessibility features, but if you follow these guidelines, you are on your way to better accessibility in your documents and workflow!
Contains PDF file.
You now have the tools to get started with creating accessible MS Word documents! To succeed in including accessibility in your document creation, it is essential you also understand why the standards exist, and how they help people with print disabilities. By following this article you can be confident that you are creating an accessible Word document right from the start.
If you want to learn how to streamline your document creation with a Styles Template, find a companion article on that topic in the Next Steps section below.
Note: This resource was authored by Rachel Osolen, a freelance writer and the Production Coordinator at NNELS (National Network for Equitable Library Service), where she runs all in-house production and training for accessible formats including DOC, EPUB3, DAISY Text, and DAISY Audio. When she is not helping run production, she also assists in collection management, and works with publishers and librarians in training and creating image descriptions and accessible documents.

